AI Engineering for Manufacturing

Vision inspection you can prove is repeatable, and predictive maintenance you can trust before you drop the fixed schedule.

Start a conversation

A model that scores well in the lab can still fail on the line. The defect class that breaks it was never in the training set, the new product variant shifts the lighting, or a model swap ships without a regression gate. The same is true of a failure-prediction model that looks convincing until it meets real maintenance records.

The fix is engineering evidence around the model, not a different model. We work on inspection and equipment reliability on your production lines.

Robot arms working along an electronics assembly line

Where we help

Three Questions Manufacturing Teams Bring Us

  • Inspection

    Inspection

    Is the defect visible, and are the pass/fail calls repeatable?

  • Rollout

    Rollout

    Keeping an inspection model honest after the pilot.

  • Predictive maintenance

    Maintenance

    Trusting a failure-prediction model enough to change the schedule.

Inspection

Will Automated Inspection Work on Our Line, and Are Its Pass/Fail Calls Repeatable?

Before you commit to a line, you need to know whether the defect is visible at all, under the lighting, variation and cycle time you actually have. And once a model is calling pass or fail, you need to show those calls are repeatable, with a confidence bound on the defects that escape. We design the feasibility check, then the validation that lets you retire manual inspection on evidence rather than on a headline accuracy figure.

Feasibility and repeatability, in depth

Rollout

How Do We Keep an Inspection Model Honest After the Pilot?

A pilot that passes is not a line that stays passing. New variants, new defect modes and lighting changes pull performance off target without anything in monitoring noticing. We set up the threshold revalidation, drift signals and release gates that catch this before a defect escapes, and the evidence package for lines that run unattended.

Rollout, drift and revalidation

Predictive maintenance

Can We Trust a Failure-Prediction Model Enough to Change Our Maintenance Schedule?

A remaining-useful-life model has to earn its place before it replaces the fixed schedule. We work on the evidence that makes it defensible: an audit trail from vibration data to the decision, a model that moves between assets and domains without silent degradation, and alerts wired into scheduling and work orders so a prediction becomes a job someone does.

Predictive maintenance, in depth

Further reading

Where Our Manufacturing Thinking Is Written Down

Our articles on where off-the-shelf inspection stops, where inspection fits in quality, and which maintenance models earn their place.

2019
Founded in Budapest
10+
Patents co-authored with clients
1
Client per niche

Client Testimonials

Manufacturing AI Engineering FAQ

Can We Show That Automated Pass/Fail Calls Are Repeatable Before We Trust Them over Our Inspectors?

Yes, with a repeatability and reproducibility study on your own parts and stations, run before any contract or line change; we design it with your quality team and hand over the script so they can re-run it. Read more: Repeatability and Reproducibility Before a Vendor Contract.

How Would We Know the Inspection Model Is Quietly Getting Worse on One Variant or Line?

Not from one aggregate accuracy number. We set up drift and stratified checks per line, camera and defect class, so a silent loss shows before defects escape. Your team re-runs those checks after handover. Read more: Drift Monitoring on a Production CV Inspection Line.

How Do We Prove a Failure-Prediction Model Is Safe to Rely on Before We Drop the Fixed Schedule?

Audit it for data leakage, check that its uncertainty is calibrated, then run it in shadow mode beside the fixed schedule against go/no-go criteria agreed with your maintenance and risk owners. That is the evidence a maintenance lead can challenge. Tell us about the equipment and the decision and we will scope it. Read more: Data Leakage Machine Learning Audits for RUL Model Transitions.

Which Machines Should Get Sensors First, and What Do We Do with an FMEA?

Start with a criticality ranking from your FMEA, even without sensor history, then turn the ranked failure modes into thresholds and work orders. That tells you where sensors pay back first. Read more: FMEA Asset Criticality Ranking Without Sensor History and Risk Priority Number to Action: Thresholds, Work Orders, Baselines.

Do You Certify or Sign off the System?

No. We produce engineering evidence: results and checks that the quality, safety and validation roles you already have can read and challenge. Sign-off stays with them.

How we work with manufacturing teams

An engagement has a fixed scope and ends in something your team keeps and can re-run. We work alongside your quality, process and maintenance functions; we do not substitute for them.

Lands in the Production AI Monitoring Harness: 4–10 weeks, milestone or fixed-price.

Heading into a line-release gate, a pilot, or a change to a maintenance schedule? Tell us the line and we will route you to the right starting point.

Start a conversation
Operator in protective clothing at a production-line control panel

Keystone Deep Dives

Show all 113 deep dives